DKGB2-1500-2V1500AH SEALED GEL LEAD ACID BATTERY

Short Description:

Rated Voltage: 2v
Rated Capacity: 1500 Ah(10 hr, 1.80 V/cell, 25 ℃)
Approximate Weight(Kg,±3%): 96.8kg
Terminal: Copper
Case: ABS


Product Detail

Product Tags

Technical Features

1. Charging efficiency: The usage of imported low resistance raw materials and advanced process help make theinternal resistance smaller and the acceptance ability of small current charging stronger.
2. High and low temperature tolerance: Wide temperature range (lead-acid:-25-50 C ,and gel:-35-60 C), suitablefor indoor and outdoor use in varies environments.
3. Long cycle-life: The design life of lead acid and gel series reach to more than 15 and 18 years respectively, forthe arid is corrosion- resistant. and electrolvte is without risk of stratification by using multiple rare-earth alloy ofindependent intellectual property rights, nanoscale fumed silica imported from Germany as base materials, andelectrolyte of nanometer colloid all by independent research and development.
4. Environment-friendly: Cadmium (Cd), which is poisonous and not easy to recycle, does not exist. Acid leakageof gel electrolvte will not happen. The battery operates in safety and environmental protection.
5. Recovery performance: The adoption of special alloys and lead paste formulations make a low self-dischargerate, good deep discharge tolerance, and strong recover capability.

DKGB2-100-2V100AH2

Parameter

Model

Voltage

Capacity

Weight

Size

DKGB2-100

2v

100Ah

5.3kg

171*71*205*205mm

DKGB2-200

2v

200Ah

12.7kg

171*110*325*364mm

DKGB2-220

2v

220Ah

13.6kg

171*110*325*364mm

DKGB2-250

2v

250Ah

16.6kg

170*150*355*366mm

DKGB2-300

2v

300Ah

18.1kg

170*150*355*366mm

DKGB2-400

2v

400Ah

25.8kg

210*171*353*363mm

DKGB2-420

2v

420Ah

26.5kg

210*171*353*363mm

DKGB2-450

2v

450Ah

27.9kg

241*172*354*365mm

DKGB2-500

2v

500Ah

29.8kg

241*172*354*365mm

DKGB2-600

2v

600Ah

36.2kg

301*175*355*365mm

DKGB2-800

2v

800Ah

50.8kg

410*175*354*365mm

DKGB2-900

2v

900AH

55.6kg

474*175*351*365mm

DKGB2-1000

2v

1000Ah

59.4kg

474*175*351*365mm

DKGB2-1200

2v

1200Ah

59.5kg

474*175*351*365mm

DKGB2-1500

2v

1500Ah

96.8kg

400*350*348*382mm

DKGB2-1600

2v

1600Ah

101.6kg

400*350*348*382mm

DKGB2-2000

2v

2000Ah

120.8kg

490*350*345*382mm

DKGB2-2500

2v

2500Ah

147kg

710*350*345*382mm

DKGB2-3000

2v

3000Ah

185kg

710*350*345*382mm

2v Gel battery3

production process

Lead ingot raw materials

Lead ingot raw materials

Polar plate process

Electrode welding

Assemble process

Sealing process

Filling process

Charging process

Storage and shipping

Certifications

dpress

More for reading

Daily maintenance contents of storage battery
(1) Remove surface dust;
(2) Check the connection for looseness, heating and corrosion;
(3) Check the battery case for leakage and deformation;
(4) Check whether acid mist escapes around the pole and safety valve;
(5) Check whether the floating charge voltage of the storage battery is normal;
(6) Check whether the temperature of the storage battery is normal;
(7) Measure whether the floating charge voltage of single battery is within 2.25 ± 0.03V;
(8) The battery pack is connected to a DC load of about 2000W. When the discharge current is about 10A, check whether the voltage of the single battery is normal;
(9) For battery packs that have been put into operation for many years, if the internal resistance of individual individual batteries increases and the performance decreases, the solution is maintenance and activation, that is, cleaning the electrode plate, replacing the electrolyte and repeatedly charging and discharging with large current; It is not recommended to replace a few new batteries, or the internal resistance of the new and old batteries will be different, which will lead to poor performance of the whole battery group and greatly reduce the service life of the whole battery group.


  • Previous:
  • Next:

  • Related Products